NEED HELP GENERATING MULTI AXIS TOOL PATH FOR UNDERCUT CONTOUR

[ebwestgerdes]

Hi,

I need help generating a multi axis tool path of some sort on an undercut contour that I can use on UMC1000 or UMC750. Please use my fusion file and see if you can help me out. I have also attached pictures of the high- lighted area "blue" that is needing to be achieved. My email is evanw@buckeyedesign.net. Thanks !

 

 

 

[a.laasW8M6T · Accepted solution]

Hi

I would use Geodesic here

[ebwestgerdes]

Thanks Andrew! looking forward to getting these into production here in Ohio! 

[ebwestgerdes]

Hi Andrew, I have another casting that I need to generate a 5-axis tool path with my custom form tool I have. I have high-lighted the area blue on the part that needs machined. Not sure if this is a multi-axis contour tool path or another alternative. Please see the attached Fusion 360 file below. Thanks again!!!!

Evan Westgerdes

evanw@buckeyedesign.net

[a.laasW8M6T · Accepted solution]

Hi

See video and file