my nc post can't open a file that doesn't exist?

[ppavone3]

I have reinstalled the .cps file with no luck. I even reinstalled Fusion 360. I have actually cut this file a few weeks ago no problem. Went back to try it again and this happens. That file metric?: is also placed in some of the post properties parameters. I included a screenshot for that.

thanks for any help

###############################################################################

Error: Can't open file \\pavonenas\homeshare\.CNC\TestFiles\metric?:

Error at line: 1563

Error in operation: 'LauraContour2'

Failed while processing onSection() for record 536.

###############################################################################

Error: Failed to invoke function 'onSection'.

Error: Failed to invoke 'onSection' in the post configuration.

Error: Failed to execute configuration.

Stop time: Thursday, February 6, 2025 10:10:17 PM

Post processing failed.

[a.laasW8M6T · Accepted solution]

Hi

Seeing as this is not an official Autodesk post processor you will need to contact the post developer for clarification.

It looks like the post is trying to read in some external files for executing some functions.

I've had a look through the Github readme but don't see anything referencing how this is supposed to work

https://github.com/guffy1234/mpcnc_posts_processor

[wtowsley4ADLD]

Im having the same issue. Just purchased a used lowrider v2 and was hoping to get it running but the post processor has been giving me issues. 

[wtowsley4ADLD]

After some digging I found this. haven't been able to test it but looks promising 🙂

https://forum.v1e.com/t/fusion-360-post-processor-mpcnc-v3-0-beta-1-is-available/47872/21