Looking for Fusion360 post processor.

[marc5KGCS]

Im looking for a Fusion360 post processor for a 2002 144G10 CNC with a AMC controller. Controller picture attached.

Is it even possible to get Fusion 360 to work with such old Controller?

[marc5KGCS]

Im looking for a Fusion360 post processor for a 2002 144G10 CNC with a AMC controller. Controller picture attached.

Is it even possible to get Fusion 360 to work with such old Controller?

[seth.madore]

If it takes G-code, it should be possible.

Do you have any cnc programs you have run with success? Put them in a .zip file and attach them here. We can advise further once that's been done.

[marc5KGCS]

Hi there,
It does take G codes, but as far as a CNC program I don’t have any, for we r just getting into that. We bought the machine just the other day, they however were running it
With ALPHACAM, and said I can have the post if I want it. I didn’t think it will be of any use as far as using fusion360

[seth.madore]

Their post won't be of any direct use to us, but if you could get a hold of a program that they HAVE run, or direct out of their AlphaCAM, that would greatly help in figuring out which way to send you

[marc5KGCS]

Hi,

Alright I will do that, and get back to you.

 Thanks a bunch!

[marc5KGCS]

Hi,

Attached is the file that the company sent me, and hopefully what you were asking for.

Thanks.

[marc5KGCS]

Hi seth.madore,

I sent a file later last week, could you please let me know if it was what you wanted.

[seth.madore]

Sorry, last week was really crazy, I lost sight of this post and it fell off my radar. I'll take a look at it this morning and see if we can get you something that will work.

-EDIT-

Do you have a manual for this machine by any chance?

[marc5KGCS]

K, thanks. yes we have a Manual.

[seth.madore]

Okay, and does it give any guidelines for program formatting or other info?

[marc5KGCS]

This is what i found so far i'll keep looking.

[marc5KGCS]

This is what i found so far i'll keep looking.

[marc5KGCS]

Oops, i sent that twice sorry.

[seth.madore]

Ok, but nothing in regards to "it needs this code at the beginning" or "no more than 2 G codes per line" etc etc.

[marc5KGCS]

Hi,

I can not find anything regarding " it needs this code at the beginning" in the books that we have.

To me there should be another book here, none of the books to me is a operators manual. 

[marc5KGCS]

Hi, 

Looks like i cant find anything. Is there any other way i could find out?

[marc5KGCS]

Hi again Sir,

I think that i have found what your were looking for. Please find attached programming information for CR.ONSRUD 

[seth.madore]

That's some good stuff there. Let me work through it and try to get you a post. I'm rather backed up in work at the moment, so it might not be until next week before I get to this (so if anyone wants to, feel free to have at it!)

[marc5KGCS]

Take your time sir, as you might have noticed what i sent you is for a different controller then the one i have.

However i sent CR.ONSRUD the serial number and model number plus controller name and mold of our machine and this is what they sent, but it could still be a mistake. I'm still waiting for a reply from them.

Thank you much for your time and effort.    

[marc5KGCS]

Hello Seth Madore,

CR.ONSRUD just replied back that those G-Codes and files will work for both controllers.

Thanks.