Keeping the section view while in the cam mode

[sstephe1622]

Is it possible to keep the section view while in the CAM view?  I can use the section view in design mode, but just want to double check drill depths on some cross drilled holes in simulation.

Thanks

[LibertyMachine · Accepted solution]

No, sadly. But, you can change the opacity of the part, which does close to the same thing, just less elegant

[Boopathi_Sivakumar · Accepted solution]

@sstephe1622

Just for a look around copy the model body and split that based on the section plane, While simulation turn of the other bodies except the one half.

Thanks,

Boopathi