I know this probably isn't enough information but I just want to see if there is a super simple explanation for the issue I'm having that I just haven't thought of. Attached are photos showing the issue I am having. I am using a bounding box for the material, the stock is drawn oversized everywhere I want the part to be cut, but for some reason it just skips this area of the part. I have tried 2d, and 3d adaptive. And also tried a 3d contour toolpath. All having the same issue. I just can't seem to get it to cut to the bottom out towards that front face. (The .25 left at the bottom on the inside where it is cutting properly is intentional. OD of the donut is the only problem child) Thanks.
