Hi all!
Sometimes the calculation of the stock in process stops in the process because I was doing other things.
How can I get it to calculate again?
Switching off and on 
Ok, I can re-generate an operation, but for large operations this would take twice the computing time.
Is there a trick I can use to get it to continue calculating?
Hi @marcus.toepke, unfortunately, there isn't.
I also have to regenerate the toolpath to get the stock calculation started again. 😞
Hopefully, this is something that will be fixed soon.
If my post answers your question Please use Accept as Solution & Kudos This helps everyone find answers more quickly!
Met vriendelijke groet | Kind regards | Mit freundlichem Gruß
Marco Takx
CAM Programmer & CAM Consultant
Actually, there is a Clear IPS Cache button, which clears all IPS. Toggle the IPS Generation button and it will recalculate all the IPS of the active document.
I was going to suggest what Seth just said. There might be another alternative: close and reopen the document. That might be slower or faster than regenerating all of the IPS depending on how many operations you have.
