Message 1 of 2
Error when post processing in fanuc turning.
Not applicable
09-16-2020
08:35 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
My program will not post in the fanuc controller setting, however it will work in the HAAS setting? Im getting the error "Bad axis" I will paste the error message below.
Information: Configuration: FANUC Turning
Information: Vendor: Fanuc
Information: Posting intermediate data to 'C:\Users\Garrett\AppData\Local\Fusion 360 CAM\nc\1001.nc'
Error: Failed to post process. See below for details.
...
Code page changed to '1252 (ANSI - Latin I)'
Start time: Wednesday, September 16, 2020 3:30:48 PM
Code page changed to '20127 (US-ASCII)'
Post processor engine: 4.5718.0
Configuration path: C:\Users\Garrett\AppData\Local\Autodesk\webdeploy\production\4143a7d9c7cd58a0f86968fd3809be3e34945ca1\Applications\CAM360\Data\Posts\fanuc turning.cps
Include paths: C:\Users\Garrett\AppData\Local\Autodesk\webdeploy\production\4143a7d9c7cd58a0f86968fd3809be3e34945ca1\Applications\CAM360\Data\Posts
Configuration modification date: Tuesday, September 15, 2020 5:15:14 AM
Output path: C:\Users\Garrett\AppData\Local\Fusion 360 CAM\nc\1001.nc
Checksum of intermediate NC data: 5901cb6af5de9ceb1cb060764e9e03e0
Checksum of configuration: 37d35ac99dbff2cb803b590412f713c2
Vendor url: http://www.fanuc.com
Legal: Copyright (C) 2012-2020 by Autodesk, Inc.
Generated by: Fusion 360 CAM 2.0.8950
...
###############################################################################
Error: Bad axis specified for writeRetract().
Error at line: 1815
Error in operation: 'Face1'
Failed while processing onSection() for record 384.
###############################################################################
Error: Failed to invoke function 'onSection'.
Error: Failed to invoke 'onSection' in the post configuration.
Error: Failed to execute configuration.
Stop time: Wednesday, September 16, 2020 3:30:49 PM
Post processing failed.
