Add Comment to end of each operation in post

[justinp4CQKH]

I'm trying to edit my post to where the opening of each operation includes "(OPS)" (figured that out relatively easliy) and the end of each operation is "(OPE)".

I am assuming a simple writeComment("(OPE)"); will do. I just can't seem to figure out where to place it.

[seth.madore]

Which post processor are you using?
In general, it will be around the "onSectionEnd" area.

Have you tried the Visual Studio Code addin that we made? This makes it super easy to jump to the related area of the code, quite interactive with the g-code. It's really nice for tasks such as this

[justinp4CQKH]

Thanks for the response.

I am using the Visual Studio Code plug-in (and it really is helpful being able to debug while you're editing). And I think I'm just using the standard 2d haas post processor. But I'll need to be able to add this to any Haas post.

But the problem I'm coming across by just placing it in the onSectionEnd is it's not encapsulating the retract moves and other end of op codes for the next operation.

For example:

(OPS 2D-Face)

N25 T1 G33

(myToolComment)

N30 S5000 M3

N35 G17 G90 G94

N40 G54

N45 M8

N50 G1 X3.1496 Y-0.9596 F650.

N55 G0 G43 Z0.5906 H1

N60 T2

N65 G0 Z0.1969

N70 G1 Z-0.0394 F39.37

N75 X-3.1496

N80 G2 Y0.0374 I0. J0.4985

N85 G1 X3.1496

N90 G0 Z0.5906

(OPE)

N95 M9

N100 M5

N105 G53 G0 Z0.