2d Face Mill Enhancements

[Anonymous]

Using Face Mill to cut two sections of part. Could use radial stock to leave to have material left to

control size of feature at middle of part using 2d contour. Also lead-in and lead-out  linear length

would be helpful.  Ended making part with 2d adaptive, but prefer to make cut like in example file.

Thanks,

Pathfinder20 

[Steinwerks · Accepted solution]

You can get this sort of toolpath with 2D Contour too though, and both sides in one toolpath:

File attached.

[Anonymous · Accepted solution]

Did try 2d contour earlier but did not get settings set as in your example. This will work

and thanks for the quick response and solution.

Pathfinder20