Adding Via in Polygon causes airwire errors

Adding Via in Polygon causes airwire errors

erussellK6Q8Z
Contributor Contributor
77 Views
1 Reply
Message 1 of 2

Adding Via in Polygon causes airwire errors

erussellK6Q8Z
Contributor
Contributor

I have added a polygon to my routed board which had no airwire errors. Adding a thermal via to the polygon instantly caused 100+ airwire errors to appear. Any idea why this might have happened? Deleting the via removed the airwire errors.

0 Likes
78 Views
1 Reply
Reply (1)
Message 2 of 2

jorge_garcia
Autodesk
Autodesk

Hello @erussellK6Q8Z ,

 

I hope you're doing well. When that happens just refresh the polygon, this is a known behavior. Whenever a new object is associated with a polygon its airwires reset. Refilling the polygon will make those airwire errors go away.

 

Let me know if there's anything else I can do for you.

 

Best Regards,



Jorge Garcia
​Product Support Specialist for Fusion 360 and EAGLE

Kudos are much appreciated if the information I have shared is helpful to you and/or others.

Did this resolve your issue? Please accept it "As a Solution" so others may benefit from it.
0 Likes