3D PCB silkscreen in wrong place with hole in PCB design

[george.hartt]

hi, I have a board which has a hole in the middle, and for some reason Fusion is placing the silkscreen on the inside where the hole should be, even though the copper is placed properly in the perimeter, respecting the hole inside. Not sure what to do about it 😞

[george.hartt]

This is the error that Fusion is giving me: 

[george.hartt · Accepted solution]

Ah I managed to find out: you need to right click on the board in design history and click "Edit Board", then select the correct profile!