Was astonished to see that drawings aren't actually curved vectors but line segments
[that's a uniform thickness wall of thickness, t, with inner fillet radius, t/2, and outer fillet radius, 3t/2; both curves should be 1/4 of a circle but for some unknowable reason, they're being approximated by two straight line segments)
Is the image from the drawing workspace or is it from an exported PDF. I seen some pretty bad accuracy in PDFs, not noticed anything that bad in the workspace.
Mark
Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Here's something odd, the same drawing on 2 different computers one with a 2gb Nvidia GTX660 and one a 2gb GTX960 both DirectX 11.0
GTX660
GTX960
The faceting is only visual if I make a 100:1 detail view it shows as an arc and exporting the file a a DWG and viewing in DWG Trueview shows an arc. I can't see any differences in the preferences on the 2 computers so I don't know why one's better than the other.
Mark
Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
