Unable to mirror features onto another body
You can only Mirror features within the same Body. It is not possible to mirror features between two separate bodies. If you attach your model and indicate "exactly" what you need, there may be other methods to accomplish it. If you do not know how to attach your Fusion 360 model follow these easy steps. Open the model in Fusion 360, select the File menu, then Export and save as a F3D or F3Z file to your hard drive. Then use the Attachments section, of a forum post, to attach it.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Just remove the 4 Move features in the Timeline. Use a sketch on one of the Origin planes to define your holes. Extrude symmetrical or two directions to create the same size holes in each piece.
ETFrench
OR, change your existing Cut features to new bodies, mirror them, then combine cut all. There are many ways to skin the cat, some more efficient but all get the job done. Model attached.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
You have been presented with a number of solutions to your design problem, please do not forget to select the "Accept Solution" icon to do three things. First it allows others to find a solution to a similar question, two, it closes the Forum post and last, it acknowledges that you accept the solution given. If you need further help, please ask. If you like to read why "Accept Solutions are important, take a look at this webpage.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
