There was an unexpted problem with exportin the flat pattern as a dxf file
Are you using a Subscription License of Fusion? If so you can export the DXF from the 2D Drawing workspace. If you do not have a subscription license, do you need the Bend Lines to show up in the DXF? If not, you can create a sketch on top of the Unfolded model and then create a DXF from it.
DXF using the Drawing method is attached.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
I rolled back the timeline to find the first place where flat pattern failed, which was after extrude 4.
in sketch 4 you used mirror to create the lines for the extrude profile, introducing some error. if you inspect the line and the edge it is suppose to represent you can see they are not exactly the same by a very small amount.
instead project the edges from the solid to create the profile. after doing that the flat pattern worked up to that point. i've attached a version with sketch 4 fixed. I'll leave it to you to go thru and fix the rest of the sketches.
zooming way in is usually counter productive with CAD, as you get graphic artifacts and you can't trust what you see beyond a certain point.
long left mouse click brings up a dialog that shows you what's under the mouse pointer and lets you select the one you want-
