Set current view as top

[Anonymous]

After doing a couple "Change current view to top", the red,green and blue axis lines all turn black.  This did not happen before the last update.  I have to restart fusion to get the colors back.

Using a 3Dmouse, and switching from multi view back to single view, the 3Dmouse looses focus and will not work.

Why does the X axis always revert to the wrong orientation when clicking the "top" button?  it is 90 degrees off.  Every other program I have ever used shows the X axis as a horizontal line when doing a top view.  This also matches most VMC's  I know it can be rotated manually, but with multi views it gets confusing.

Todd 

[NicolasXu]

Hi Todd,

Thanks for your feedback regarding multi view.

For the 3D mouse issue, I can reproduce it and will ask the development team for a solution. (The tracking ID is: FUS-16156)

For the X axis issue, did you work on a Z Up design or Y Up design? I will forward it to the team to take a look.

Best Regards,

[Anonymous]

Z up.

If you go to front view, it shows a green ( Y ) line horizontally. This is incorrect. It should have a red line horizontally on a front view and a green line horizontally on a right view.

The way it is laid out now, everything is 90 degrees out of how it sits in real life on a milling machine. I know it can be changed, but it reverts on every new drawing and is just confusing to machinists.

On a front view, X+ and X- should show as a red line, left to right on screen, not a green line. Red=X Green=Y Blue=Z



Todd

[NicolasXu]

Hi Todd,

Thanks for the confirmation. I have forwarded it to the team to review the situation.

Thanks for providing the details. Please keep feedback coming! 

[Anonymous]

I'm going to bump this question again, when I start a new drawing and click the top box, why is top box show up 90 degrees rotated from real world coordinates?

When I click set current view as top, it rotates the top box and the red and green lines -90 degrees.

I have attached 2 snips.  I want the top box to be horizontal and the red line to be horizontal.

Todd