section analysis flickers

[Anonymous]

After setting up a section analysis I get wild flickering objects.

Sometimes the inside is hollow, then it changes to solid. but for no apparent reason to me.

See it here:

http://autode.sk/1JmaByL 

Is there anything I could do to get a better result?

[Anonymous]

Hmm, try going to Display settings (the little monitor on the bottom of the screen) then Visual Effects and be sure everything, except Anti-aliasing, is turned off, including Ambient Occlusion.  Also, if that doesn't help, try deleting your modified materials and returning them to the default.  I saw a problem similar to this before and that fixed it.

Jesse

[Anonymous]

I tried everything you recommended. It did not help for my problem.

[colin.smith]

Hi Leo, 

There was a small update over the weekend that may have addressed this problem. Can you confirm that you have the latest version and if the problem is still there?

In the About window for Fusion you should see the release number 2.0.1593.

Thanks

Colin

[Anonymous]

Yes, I got the newest Version.

Sreenshot with different material and different appearance:

btw, I remember just now that I was affected by the "black modeling" that some intel Graphic Cards had. Maybe a graphic card issue?

[Anonymous]

Hey Leo, if you could share the model I could try it out.  My email is jjurbanus5@yahoo.com

Jesse

[colin.smith]

Hi Leo, 

Please send me a copy of the file, I will have the graphics team take a look.

colin.smith@autodesk.com or post it here.

Thanks

Colin

[colin.smith]

Hi @Anonymous

Can you send me your machine specs?

OS

Graphics

Memory 

etc.

Thanks

[colin.smith · Accepted solution]

Hi @Anonymous

Looks like this is fixed in the next release.

Although I wasn't seeing the exact problem that you were I was getting strange results from section analysis also. 

Here is what I was getting in the current release:

This is how it shows in the development build

This fix will be in our September release.

Colin

[Anonymous]

What your were getting looks very similar to what I have been seeing.

It looks like this will be solved with the next release. Very good. Thank you

[colin.smith]

My pleasure. Please accept this post as a solution.

Thanks

Colin

Colin Smith | Product Manager | Autodesk Canada Co.
M. 647-203-2590 | T. 905-582-7396

[cid:image001.png@01D03BCC.EFA6FD50]