Removing multiple faces

[PeteDregz]

Hi Everyone, I'm trying to remove the material that is highlighted in blue. I have attached the file. I tried a few different things...but no luck.

Some help would greatly be appreciated. Thank you kindly.

Peter

[n8bot]

It looks like you have two parallel lines on the top and bottom of the part that would form the plane that you want to cut out of the piece. I would make a construction plane across those two edges (by selectiong the construction drop down menu -> Plane through two edges, and selecting the two lines). Then, modify -> split body and use the plane as the cutting tool. After that, remove the remaining unwanted body. Edit: Upon closer inspection, it seems that the geometry you're trying to create is a little more complex than I first thought. To use the method I proposed, you may have to make several planes and several cuts.

[TrippyLighting]

Looking at your file and based on the sketches I am wondering what you expect for the end result look like. 

If you want flat faces, the sketch lines will not line up with them.

[laughingcreek · Accepted solution]

Is this the type of thing your after?  what ever approach you take you'll need to fix the line in sketch 7 to be coincident to the end of the line in sketch 1. and like everybody else is saying, those faces aren't going to be flat.  they're potato chipped.

[PeteDregz]

Thanks for all of the great feed back everyone! This was data that was supplied by one of my associates and as I was drawing it up I realized that this may not work exactly as planned.

Still learning everyday and loving Fusion 360!! Have a great weekend!

Peter