Questions about linear feature patterns

Questions about linear feature patterns

st_smith74
Explorer Explorer
1,125 Views
1 Reply
Message 1 of 2

Questions about linear feature patterns

st_smith74
Explorer
Explorer

 

I am trying to complete a linear pattern up to the edge in the attached screenshot. In Solidworks, I can have the number of instances driven by the distance to the edge and the pitch of the instances. This is useful in my model when the length of the carrier tape changes and the number of instances of the sprocket holes changes accordingly. Is this something I can emulate in Fusion360, or is this not a supported feature?Capture.PNG

 

 

0 Likes
Accepted solutions (1)
1,126 Views
1 Reply
Reply (1)
Message 2 of 2

lucasproko
Alumni
Alumni
Accepted solution

Hey @st_smith74,

 

Thanks for your question. You can indeed do this in Fusion by using User Parameters. Once you've specified some parameters for length, spacing, etc, you'll be able to use expressions to calculate the number of instances that you'll want in your Rectangular Pattern. I'll include a few more detailed documents below to help you learn the workflow.

 

Here's a detailed article that walks you through the Change Parameters dialog box: 

 

https://help.autodesk.com/view/fusion360/ENU/?guid=GUID-76272551-3275-46C4-AE4D-10D58B408C20

 

More specifically to your situation, here's a quick gif I made to show you how you can accomplish what you're going for: 

 

ParametersExample.gif

 

And here's the file I used to create that: https://a360.co/2KaLgdI

 

You'll be able to get even better results by using some of the rounding functions found in the first article like floor() and ceil() when you're calculating the number of instances for the pattern. Let me know if you have any additional questions!

 

Thanks,

 


Lucas Prokopiak
Fusion 360 Product Manager (Sketch/Model)