Loft with rails from two splines - errors

[and.magro]

Hello,

I'm trying to generate a loft using 2 profiles and 2 rails with splines, but what initially seemed a simple design now is driving me crazy.

When I tried to loft the profiles with the guide rails I got some errors, and I already tried everything to solve those problems but with no luck.

The picture bellow shows what I want to do. Fusion360 Proj: http://a360.co/2nu9LLG

After seeing some videos I tried to replicate the simple example presented in one of your youtube videos, but again with no luck.

Here's the Fusion360 project of this last example: http://a360.co/2oeN5he

What could be wrong?

Thanks

[cad3na]

Rail 1 and Rail 2 seem like start and end in Profile 1 and just pass Profile 2. Is this the case?

[and.magro]

Yes, It's the case, like the F360 youtube video.

[cad3na · Accepted solution]

In the video it's shown with 4 rails (4 lines following the path up to the point) for the tent, even if they look as 2 lines, they are four.

https://youtu.be/fXQ28AVaMh0?t=11m21s

Perhaps if you break the lines in the sketches to separate at the profile 2

[and.magro]

Thanks for that tip, problem solved! 😉