Loft Problem

[moh2063]

Hello everyone,

I need some help, I'm not very good at 3D modeling. I'm trying to make a sort of katana blade, I drew the two faces, the shape, then I wanted to connect them with a loft, but I'm getting weird shapes.

Thanks in advance.

[moh2063]

Here are the other Screenshots.

[g-andresen]

Hi,

Please share the file.

File > export > save as f3d on local device  > attach it to the next post.

günther

[moh2063]

Here you go.

Thanks in advance.

[Haad_Ali]

I have to use the centerline for giving the direction of loft from bottom reference line and use extrude cut to remove body exceed the above reference line. Let me know if this helps. Or you want some different body. Thanks!

[moh2063 · Accepted solution]

Thanks a lot, it's a pretty good idea.

I tinckered a little and used Surface Loft instead, it gave a very good shape.

 

[shahriarsifat1802164]

Hi,
In this case, I will prefer making a surface and then cut it into the required sape>>offset the surface up to 0.00 mm >> then thicken it>> and lastly hide the mane surface.
If fillet or chamfer is needed to add you can add them
If you have any further query feel free to post.
Thank you.

[shahriarsifat1802164]

or you can trim the surface and thicken it.
Thank you.

[shahriarsifat1802164]

I am providing a screencast, therefore.