Inline Addition of Parameters

Inline Addition of Parameters

benM4QF2
Community Visitor Community Visitor
321 Views
2 Replies
Message 1 of 3

Inline Addition of Parameters

benM4QF2
Community Visitor
Community Visitor

This is either a feature request or a request for help accomplishing this process.

 

In Fusion360, while sketching and adding dimensions. It would be more efficient if I could add a parameter by assigning the dimension to be "Max_Width = 180mm". Then the Parameter would be created and if I need to use that parameter in the future or change it, I can go to the Parameter section and modify as needed. 

0 Likes
Accepted solutions (1)
322 Views
2 Replies
Replies (2)
Message 2 of 3

jhackney1972
Consultant
Consultant
Accepted solution

You can do this anytime you desire.  I show this is the silent video below.  The only thing you need to keep in mind it that Model Parameters are not included in the Parameter Export function.  Other than that, they can be used like other parameters as desired.

 

Parameter Export.jpg

 

 

John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature

Message 3 of 3

benM4QF2
Community Visitor
Community Visitor

John-

 

That's awesome. Thank you for taking the time to demonstrated. I had tried this and must have put a space where it didn't want to be. I followed your guide and it worked great. 

Thanks again!

 

0 Likes