How to model a curved arm

[maorbiton9654]

Hello everyone.
I want to model the object shown in the image correctly, I just created it with the help of 3 separate sketches, how I construct it correctly.

[maorbiton9654]

Hello everyone.
I want to model the object shown in the image correctly, I just created it with the help of 3 separate sketches, how I construct it correctly.

[aliobidi]

Hi , 

we didn't know what is your goal 

[aliobidi]

Hi , 

we didn't know what is your goal 

[maorbiton9654]

The goal is to build the solid correctly in a geometric sense, you can see that the geometry is very distorted in my working method.

[maorbiton9654]

The goal is to build the solid correctly in a geometric sense, you can see that the geometry is very distorted in my working method.

[g-andresen]

Hi,

Should the arm be rigid or movable (with joints)?

günther

[g-andresen]

Hi,

Should the arm be rigid or movable (with joints)?

günther

[maorbiton9654]

Rigid

[maorbiton9654]

Rigid

[whittakerdw · Accepted solution]

I cleaned it up a bit, I am not sure if this is what you were looking for or not. If not, please let me know and we may can rework this. I have one file how you had it that was cleaned up, and I have another where I filleted the edges with a 1 mm fillet to clean it up and join the parts a little better.

[whittakerdw · Accepted solution]

I cleaned it up a bit, I am not sure if this is what you were looking for or not. If not, please let me know and we may can rework this. I have one file how you had it that was cleaned up, and I have another where I filleted the edges with a 1 mm fillet to clean it up and join the parts a little better.

[maorbiton9654]

Ok, looks good, I understand there is no other way but to create some drawings ...
I really thank you.

[maorbiton9654]

Ok, looks good, I understand there is no other way but to create some drawings ...
I really thank you.

[whittakerdw]

After I looked at it more, the middle bar wasn't centered at both ends so I corrected that. I filleted one with as large of fillets as it would accept to allow as smooth of a transition between parts as I could. Again I also have one that doesn't have fillets in case you weren't intending on having fillets.

[whittakerdw]

After I looked at it more, the middle bar wasn't centered at both ends so I corrected that. I filleted one with as large of fillets as it would accept to allow as smooth of a transition between parts as I could. Again I also have one that doesn't have fillets in case you weren't intending on having fillets.

[g-andresen · Accepted solution]

Hi,

have a look at this

günther

[g-andresen · Accepted solution]

Hi,

have a look at this

günther

[maorbiton9654]

Wow great idea, you really helped me .....
Thank you so much for your time and thought.

[maorbiton9654]

Wow great idea, you really helped me .....
Thank you so much for your time and thought.