- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
Can you please give me some pointers if what I am looking for is possible in Fusion 360 ? It is hard to describe, otherwise I'd expect my google queries to return something sensible, sorry ...
Attached is a design with a Micro Servo and just below it a rectangular box.
What I would like to do is somehow either extrude box further to the top of the servo, or push the servo into the box so that it ends up in a housing with a tolerance of T.
My first inclination was to project servos profile and do an extrude cut, however this only maintains the parts shape in one plane and the bottom would be a flat surface instead of creating a contour below part's bottom details.
Hope this is making sense, basically, the box is a plastic piece and I'd like to make a housing for servo to pushed into to keep it in the correct location, while the end is extruding from the side of the box. Needless to say the bottom of the box is to be shelled.
Many thanks
Solved! Go to Solution.