How to create a lopsided cone?

[theodor.benad]

Hey,

In my project I need to construct a lopsided cone but no matter which area on which axis is rotated, I don't get the wanted result.

I want the footprint of the (almost) zylinder to be the footprint of the cone and the point at the bottom (see figures/project) to be the top of the cone.

I mean I could just ignore it and make it different, but I think my idea should be possible so...

Pls help me!

Thanks!

[davebYYPCU]

Loft the cylinder face, to the sketch point.

Might help......

[LimoZitrone]

I don't know what you mean, what I shall do. Could you explain it to me please?

[LimoZitrone]

I accidently extruded some at the bottom of the zylinder. Actually the footprint of it should be inside the purple line.

[jhackney1972 · Accepted solution]

I am not sure who owns this Forum post, @theodor.benad is the original poster so I am responding to him.  The Screencast shows what I think is being requested and what @davebYYPCU mentioned you should do.  Model is attached.