How to copy/add the second side?

[autodesk_comRZ933]

Hi,
I created an irregular shape (blue) in a sketch and added two flanges A+B.
But now I want to add the exact same shape at the other end of the two flanges A+B.
I tried to copy/move ist, but this creates additional faces I can´t delete...

How copy and move or add the sketch to the other side. As I wnt to use theis for shette metal bending it all has to be connected...

Thanks for your help, Hendrik

[jhackney1972]

In my opinion, you need to create this sheet metal component using a different process.  I made the assumption you want 200mm inside measure between sides. Model is attached.

[laughingcreek · Accepted solution]

see attached

[autodesk_comRZ933]

Ok, this is a total different (and probably more advanced) approach.
As far as I understood it, you craeted the whole shape as a 2D scetch and bend it with bend lines.

Thank you for your help!

[autodesk_comRZ933]

*DANG*
THAT didn´t cross my mind:
Just model half of the object and MIRROR the other half.
A simple, genious and beginner friendly approach if the beginner thinks about it...

THANK YOU, Hendrik