How to change shape/add curve to whole structure?

[Anonymous]

Hi

I have made a basic design for a passerelle/walkway. I have done this by sketching the front face shape, extruding that to 3000mm and turning it into 5mm thick shell. 

Is this the right way to go about this??

I now want to add 100mm curve over the length (staying flat across). I have been experimenting with T-splines. Learnt a lot but not how to add this curve. 

[bob_holland]

@Anonymous

Thank you for your question.

Being that I have no history as to how you created this part, this is how I would build it.

I would design it using a Sweep with a profile and path (Spline).

I would then shell out the bottom.

With this you can go back and adjust the path if needed.

Please give this a try and see if this is what you are looking for.

Thank you for using Fusion 360.

[bob_holland · Accepted solution]

@Anonymous,

I have create a small screencast showing you how to create a sweep.

And then shell your resulting passerelle.

https://screencast.autodesk.com/Embed/Timeline/46a5a605-013a-4849-b898-12f23c404bae

Please let me know if this is not what you are looking to do.

Thank you again for using Fusion 360.