How to add rib in sheet metal components.

[Anonymous]

i draw sheet metal part in fusion 360. but dont add rib in bend portion.

[TheCADWhisperer · Accepted solution]

[Anonymous]

CAN YOU SEND , WHICH COMMAND DO I USE ?

[TheCADWhisperer]

---

@Anonymous wrote:

...WHICH COMMAND DO I USE ?

---

I used the Rib command.

But I recommend that you not worry about the Rib command just yet, you might benefit more from learning to read the feature history on the timeline.

The timeline records everything I did in the order that I did it.  The complete instructions for recreating the geometry.

I recommend that you Edit Sketch1 and recreate the sketch in a new file.  Then attach your file here for instruction on next step.

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

[Anonymous]

we dont satisfy this command. after creating rib , material not deform as like press part. have any option like catia software.?

[Anonymous]

Anybody give solution my problem.

[sam_masonHNAG]

Hello TheCADWhisperer,

I have a design in which I need to create a supporting feature on the outside of the bend - rather than a rib on the inside. Do you have any advice on how to handle that requriement?

[TheCADWhisperer]

@sam_masonHNAG 

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?