Help with sketch challenge

[smallfavor]

I have a construction line extending from a sketch that I want to have create a point at intersection with another sketch on a plane that's not at an orthographic position to the first.  I want the point to move on on the sketch as it's construction plane is moved up and the intersection point moves further from the axis.

https://www.screencast.com/t/r6pjhG41qq

[schneik-adsk · Accepted solution]

Activate the sketch that you want the point in. I understand that you want this point to be at the intersection of the construction line and the sketch plane? To do this, under the sketch menu select, project -> Intersect.

Make sure the dialog selection filter option is set to the purple icon - "Specified Entities," and then select the construction line you want to intersect with the sketch plane.   A point will get created at the intersection of the construction line and the sketch plane.

If you move the line or the plane this point is associative and updates.

[smallfavor]

Thanks for the quick response!  I had the project tool in my toolbox and wasn't seeing the other option.