Help required adding a feature
Sweep, possibly with guide rail, or loft.
If you want more specific advice, please share your model. Export it to a .f3d file and attach it to a post.
Sweep with these two rail selections, change distance option to Full Extents.
If requiring thickness, either use Thicken, or draw the required shape to supplement the curved face.
Might help...
Click on down arrow, to select correct version.
Down arrow at Perpendicular, will allow Full Extents.
Might help...
Once you've arrived at a final shape, I would remodel this from scratch. This can likely be done with less than 1/3 of the timeline features.
Yes, but you can also just post it in this thread. The participants in tis thread get automatically notified of new posts in the thread.
I have remodelled from scratch with better success using the above methods. I greatly appreciate it!
The only issue im up against now is hollowing out my new model. I have used the shell tool but wasnt quite right and with the extrusion tool its of course on the angle.
Is there a suitable workflow for extruding that recessed area straight down?
Thanks in advance
I modeled this while I was waiting for your attachment.
I assume you want something like this.
You are doing too much work.
Start a new part file.
Create the sketch shown.
Attach progress file here for next step.
Your arc is missing a Radius Dimension.
Your angled line is missing a Coincident Constraint to the Vertical Line.
Note the color of the unconstrained geometry (your actual color might be different depending on the background color).
Do you want the curved sides to be uniform thickness from the shell, or do you want those inside walls to be straight and thicker?
