Fusion 360 Hangout!!!

[Anonymous]

Since there are different time zones ... you can follow the meetings through the movie?

I found some on the net but ... it would be easier to place them in the same place. 😉

thanks
Fabio

[Anonymous]

Since there are different time zones ... you can follow the meetings through the movie?

I found some on the net but ... it would be easier to place them in the same place. 😉

thanks
Fabio

[prabakarm]

Fabio,

Keqing posts the recordings from the hangout sessions in the "Share your Fusion 360 knowledge" section of the forum.  Are you looking for something else?

http://forums.autodesk.com/t5/Share-your-Fusion-360-knowledge/Fusion-360-Hangout-Recordings/td-p/383...

Prabakar.

[prabakarm]

Fabio,

Keqing posts the recordings from the hangout sessions in the "Share your Fusion 360 knowledge" section of the forum.  Are you looking for something else?

http://forums.autodesk.com/t5/Share-your-Fusion-360-knowledge/Fusion-360-Hangout-Recordings/td-p/383...

Prabakar.

[Anonymous]

OK...

Thanks

Fabio

[Anonymous]

OK...

Thanks

Fabio

[kat.ingalls]

Hey Fabio! You can also watch them via YouTube directly - we have a playlist that will continue to be updated.

Fusion 360 Hangouts: Playlist

[kat.ingalls]

Hey Fabio! You can also watch them via YouTube directly - we have a playlist that will continue to be updated.

Fusion 360 Hangouts: Playlist

[lure23]

Last week's recording is still not on the Youtube channel. And a new one is happening tonight.

We're appreciating the efforts but wouldn't it be possible to make the recordings available within - say - 24 or 48 hours. Small team certainly can do such. How hard can it be?

See you tonight,

[lure23]

Last week's recording is still not on the Youtube channel. And a new one is happening tonight.

We're appreciating the efforts but wouldn't it be possible to make the recordings available within - say - 24 or 48 hours. Small team certainly can do such. How hard can it be?

See you tonight,

[schneik-adsk]

Well even we have to have a little summer time. Almost all of the PM team was off on vacation the last week, and Garin is on his sabbatical.

I was maning the ship by myself and did not get it uploaded. We will be sure to be more quick about the next one. I'm glad you like them.

[schneik-adsk]

Well even we have to have a little summer time. Almost all of the PM team was off on vacation the last week, and Garin is on his sabbatical.

I was maning the ship by myself and did not get it uploaded. We will be sure to be more quick about the next one. I'm glad you like them.

[MichaelAubry]

Asko!

I agree that it really should not be that hard to upload a hangout video. Unfortunately, I've run into some technical issues with the last recording which is causing the delay.  GoToWebinar uses a funky codec in WMV that makes it very particular when editing or converting. On the back end each of these recordings has actually been a multi-hour ordeal to convert and post. For this last hangout my previous tricks haven't worked. If I don’t make progress soon I’ll just upload the raw unedited wmv. I've tried Camtasia (7&8), handbrake, and Vegas.

Ideas?  Do you know if Fuze records to a mp4? 

Thanks for your patience.

Best,

Mike

[MichaelAubry]

Asko!

I agree that it really should not be that hard to upload a hangout video. Unfortunately, I've run into some technical issues with the last recording which is causing the delay.  GoToWebinar uses a funky codec in WMV that makes it very particular when editing or converting. On the back end each of these recordings has actually been a multi-hour ordeal to convert and post. For this last hangout my previous tricks haven't worked. If I don’t make progress soon I’ll just upload the raw unedited wmv. I've tried Camtasia (7&8), handbrake, and Vegas.

Ideas?  Do you know if Fuze records to a mp4? 

Thanks for your patience.

Best,

Mike

[Oceanconcepts]

A link to the raw unedited WMV would work for me, certainly as an interim step, if a link could just be posted from the forums. I had to miss this morning's hangout, and I'm very interested in the content. 

Ron

[Oceanconcepts]

A link to the raw unedited WMV would work for me, certainly as an interim step, if a link could just be posted from the forums. I had to miss this morning's hangout, and I'm very interested in the content. 

Ron

[lure23]

Exactly! We can provide a "cloud" based WMV -> any format conversion service for Autodesk. 

[lure23]

Exactly! We can provide a "cloud" based WMV -> any format conversion service for Autodesk.