Failed to Complete Generative Design Outcome

[dhalpe.1855686]

Dear Fusion 360 Team,

Generative design failed to generate a outcome. In the pre-check and pre-viewer command did not show any error.

Please advice find attached herewith is the file.

[Anonymous]

Hi, @dhalpe.1855686 ,

I checked your files but, by looking at those its not possible to tell error. Can you please attach screenshot of error being displayed.

Thank You.

[dhalpe.1855686]

Dear sbkariya99,

Thank you for checking files. The issue is that the outcomes are failing. I also tried with resolution set to coarse bu thte result failed for this case as well.

I have attached a photo.

Thank You

[Anonymous · Accepted solution]

Hi @dhalpe.1855686 ,

There are two type of failures that we get one due to any technical error or something in which output is not being generated only.  You get some failure message on screen in red text that generally caused by technical glitch, cloud error etc.

But Perticular output getting failed can have multiple reasons depends on setup, some of resoans like;

Excesssive Obstacle geomentry

Unreaalistic load condition

Very less load

Material selection

Manufacturing Process selection

Starting shape

Resolution

As you mentioned about resolution you can try with other factors.

Thank You.

Sagar Kariya