DWG import into F360 and wrong dimensions

[Anonymous]

Hi there, 

i have looked at all the threads and i can't seem to find the solution to the problem. i'm trying to import a drawing .dwg file and its 10 times as big as it supposed to be. i'm attaching one of the drawing. also i cant select the lines for some reason and i cant turn it into a solid model. if anyone has an input its appreciated. 

Thanks, 

[davebYYPCU]

White dots on the outline, shows where the gap is.  Both endpoints need joining on the top of the A plate, and this one here.

Finding them with crossing temporary lines is one way.

Source program is not telling fusion what size it is.  MM > CMetres

[Anonymous]

How can i scale down the drawing? 

[TheCADWhisperer]

The units of the original file are Inches, not mm.

Ask the source to run the -dwgunits command (with preceding - sign) and change to option  #3. mm.

[Anonymous]

Can you be little more specific. This is all new new to me so I'm trying to
figure out the lingo. Is there a way I can change the measurements?

[davebYYPCU · Accepted solution]

You said it is 10 times too big, 

select all the sketch articles, but not the anchor point to make the change, usually the sketch Origin.  

Sketch > Scale, Select the articles, then select the anchor, type in, 0.1, and OK.

Might help....