[Drawings] Is there a way to flip dimension arrows, that also removes the internal dimension line?

[bwalker145]

Is there a way to flip dimension arrows, that also removes the internal dimension line?

See below for example.

The (0.060) was created by selecting the top horizontal edge, and the bottom two (0.080) dimensions were made by selecting two vertical edges.

Using the "Flip Arrows" command on the (0.080) dimension behaved as expected, but I'd also like to remove the internal connecting line between the two arrows, to match layout of the (0.060) dimension. Not sure if there's a way to do this?

[liang_chen]

I do not find the way to add this dimension type. Let me track it as a new requirment. DID is FUS-194016.

Thanks for the feedback.

[ashinbrot]

In a long list of aggravating features, this might be one of my top 10. Please fix this. 

Maybe it's from years of using a competitive product but I find that connecting line really aggravating, and if it's actually part of Y14-5, or some other standard someone really needs to clue in the folks at Dassault, because they don't do this and never have.