Cut Loft left behind floating "wire"

[RandScullard]

Please see the attached .f3d file.

I created this latch handle by lofting parametric solid bodies in the Model workspace. Once of the lofts was a Cut operation that "scooped out" the channel along the top of the handle. This Cut left behind a strange "wire" floating in the space removed by the loft, shown highlighted in the picture below. It coincides with an arc in one of my sketches, but it appears when I render as well, so there is some actual geometry there.

Any ideas where it came from and how to get rid of it?

[SaeedHamza]

Hi,

Just delete that loft and create a new one, because I tried lofting and didn't get any wire

here is a screencast of it

https://knowledge.autodesk.com/profile/contributions#/dashboard/public

Kind regards, Saeed

[davebYYPCU]

@SaeedHamza your link is not working for me.

[SaeedHamza · Accepted solution]

Hi,

Try this one ...

https://knowledge.autodesk.com/community/screencast/4504fe35-5401-4bcf-b0a2-76a78ef1f57c

[RandScullard]

I could have sworn I already tried that, but I followed your steps and it fixed it! Thanks!