Creating joint gives an error - This joint would form a conflict. But I don't know what's the conflict.

[vsagar1]

Modifying this model of a box and created all the rotational joints for all the hinges. The joints highlighted in black throw me the error, but it doesn't show me or tell me what the conflict would be.

https://a360.co/3AEcIQk

^ here's the link to my project.
Screenshot 2024-11-12 at 12.31.22 PM.png

[akash.nawghare]

Hello,
The Hinge & Top lid is not aligned so when you are trying the create a joint it is getting misplaced & creating a conflict joint. Try to align the Lid & then create a joint will get fixed.

Did you find this post helpful? Feel free to Like this post.

"If you find my answer solved your question, please select the Accept Solution icon"

[g-andresen]

Hi,

If you correct the position of the lid, it should work.

gandresen_0-1731502420148.png

günther

[g-andresen]

Hi,

1. in the screencast, I show how to position joints precisely by centering them with the “between surfaces” option.
2. using the “Duplicate with joints” tool, I create a second joint.
3. The mesh elements in this design make it difficult to position joints as they do not allow access to an axis of rotation.
These parts should be replaced in advance with “clean” solids.

günther