Continual "Not Responding" during Sketching

[Anonymous]

I was getting random crashing with an earlier drawing but now im stuck on a drawing that wont let me draw a line I need. I attached an image of the line I am trying to make  but keeps crashing when the line comes in contact with any of the surfaces in my drawing and shows any . My system is a ryzen 1800x, 1080ti, 16gb ram and windows 10. I currently do not have an antivirus which I noticed others were having issues with. I have also tried going into offline job statis. I tried Nvidia drivers (387.92) but did not solve the issue. I also attached the Diagnostics Data Log.

[TrippyLighting]

May be you can share your design so we can try to analyse is and see if the issue can be reproduced.

[jeff_strater]

This is a wild guess, but try turning off the "Auto Project Edges on Reference" setting in your preferences:

There is a bug that we are in the middle of fixing where this setting can cause crashes that might be related to what you are seeing.

Worth a try, at least.  But, yes, as @TrippyLighting says, we'd need to see your model to help any more than that.

Jeff

[Anonymous]

Thanks Jeff that seemed to do the trick. It would lock up when I moved the line segment away from where I started the line and it would come into contact with another surface. I turned off auto project lines, started a line and moved my cursor all around with no lock, turned auto project back on and immediately locked after I started the same line again. Im a little new to this still so im not sure how to share my project. I would still like to post it so I can get more feedback. Thanks again

[Anonymous]

This appears to fix a similar or maybe same issue i am having.

When sketching a line Fusion hangs. It appears to be when an apparent snap point is highlighted on a certain part in my assembly. Here is a Screencast of it....

http://autode.sk/2ymqcxU

I tried turning off the Auto project edges on reference as you suggested and the Not Responding issue i was getting during a sketch is not happening now.

Troy