Connect a Spline and an Arc

[neinspam2XVWZ]

I have a single multi-point spline and an arc created using the tangent feature.  The two do not form a closed profile even though the arc was created using tangents to the spline and the end points are coincident.  How does this not create a closed form profile?

[g-andresen]

Hi,

Please share the file.

File > export > save as f3d on local drive  > attach it to the next post.

günther

[neinspam2XVWZ · Accepted solution]

I figured it out, stumbled on the issue/fix. 

I selected the spline and then selected "move to sketch plane" and the profile was created as expected. 

I'm not sure how I created the spline or arc off the sketch plane  Visually it appeared on plane.

[davebYYPCU]

Show Profile is turned on/off?

Sketch is on sketch plane?

Might help....

[laughingcreek]

if you use the "move" tool on sketch entities it can be pretty easy to bump part of it off the sketch plane without realizing it.