Body heigher than extrusion distance

[maudvandeveire]

Hello,

When I wanted to set the height of my model in my setup it said it was smaller than the stock. I was suprised because I set it on O.125 mm just as the extrusion distance applied tot the body. So I went back to have a look. I measured the height of the body and it says O.164 mm. I was sure I didn't use that seize when I made the extrusion so I went back to see the original extrusion and it says 0.125mm. How come my body is heigher than my extrusion?

Thanks,

Maud

[seth.madore]

Would you be able to share your Fusion file here?
File > Export > Save to local folder, return to thread and attach the .f3d/.f3z file in your reply.

[maudvandeveire · Accepted solution]

Hello,

This morning I found what was wrong. After I extruded the body I also scaled it, so it also scaled the extrusion. I thought that scaling only scaled on the X annd Y axis, but apperently it also scales the Z-axis.

Thanks anyway,

Maud

[jhackney1972 · Accepted solution]

You can change the Scale command from Uniform to Nonuniform to get scaling in X and Y only.