Better Dogbone Fillets

[Helmi74]

Hi,

has anyone yet found better solutions to create Dogbone fillets for milling than using this Addin: https://github.com/caseycrogers/Dogbone?

I still think there should be some integration in CAM for this as you might want to change tools and therefore not "hardcode" the tool size into the design. Also the script fails relatively often on pieces with a few more inner cuts.

Currently working on some bigger screw trays and sorting boxes for my shop and i think i may have to use some other software for milling as the dogbone fillets keep driving me crazy.

[daniel_lyall]

this one works a bit better but is still just as limited https://github.com/tapnair/Dogbone

[Helmi74]

the one you linked seems to be a month older - at least the python file. Are you sure this one works better?

[daniel_lyall]

last time I looked they where still diffrent casey's one had only a single selection directly in the corrner, the tapnair one had two mode's of selection, casey may have made them the same

[Jon.Dean]

Hi Frank,

I suggest you request an enhancement on the Fusion 360 IdeaStation.

I would also add the link to this forum post for additional information.

Jon.

[Helmi74]

I finally found the time to add an idea station post.

Here it is - like to get some votes on it 🙂

https://forums.autodesk.com/t5/ideastation-request-a-feature-or/idb-p/125/tab/most-recent

[daniel_lyall]

done