As built joints are missing

[Anonymous]

My Fusion updated this morning and I no longer have as built joints. What do I do?
I tried to take a snippet for you but the menu disappears as soon as I tried to snip it! But I am looking for the path: assemble> as built joint.
Thanks
Mary

[haughec]

Hi Mary,

As-Built joints are still there!  We've removed the command from the Toolbar (because the presence of two Joint commands was a source of confusion for some users), but it's still available from the Assemble menu.  You can move the command (and others) to your toolbar by selecting the "Add to Toolbar" button that appears when you hover over commands in the toolbar menus.

Hope this helps.

Charles

[Anonymous · Accepted solution]

Believe it or not that is what I was trying to do. Yesterday my options were joints or joint origins completely skipping as built joints. I restarted my local fusion several times but it did nothing. last night I restarted the computer, and this morning it is there. So, problem solved!
Thanks,
Mary

[airduke]

I installed yesterday and restarted several times but do not see as built joints in the menu. Has this feature been deleted? I see where it used to be from watching this tutorial video

Thanks

Chris

[airduke]

Figured out a solution, though this is either a bug or should be documented better, perhaps here. The file was an imported assembly and I noticed I didnt have a history bar so I followed instructions to convert the file from a direct modeling to a history based design. For some reason the as built joint option showed up too. Hope this helps others with the same issue.

-Chris

[tsterrettZW8CR]

This fixed my problem as well thank you.

[fpmachinebob]

My As Built Joint isn't even in my assemble drop down, What gives? 

[davebYYPCU]

You need an active Timeline.

Fusion right across the platform, only provides valid options in Menus.  

Might help…..

[fpmachinebob]

That was it.

Thank you, Bob