Pretty simple but it eludes my beginner's brain! I want to get the length and cut angle plus rotational relationship of the 4 joining tubes between the parallel planes. But how?
angle measurement between two parallel planes
Because the plates are parallel, the angles are the same at each end.
Send your file for review and demonstration.
A tube at the same angle (69 /21) each end, 90 long, will fit.
Might help...
Save your file while it's open, use File > Export. Choose a location on the hard drive, and remember it.
Come back to the Forum, you will see this section on the page, click on Browse, it will allow you to find and select the exported file - or you can drag and drop it.
The file gets copied to the forum for us to review, here.
Might help...
Inspect > Measure. Select a face and an Axis, (dark blue) fusion will tell you the Angle and you can see which way it lines up.
Without the file we can't tell how you made the pipes, so we can't know if you have enough data for the question, or that you need to make some more visual geometry.
Gives you the inclined angle (43 deg), but you need some way to measure the Swing Angle (43.5 deg) I use sketching.
Might help...
