3D Print output

[peter_campbell103]

Hi,

My Printer is not on the short list of printer options in print studio - can that list be expanded to include other printers?  Alo there seems to be no option to export the file as an .stl from fusion 360 so I cannot print any designs at present.

Thanks for any assistance

Peter    

[agenttoff]

 If you go to File > 3D print, then open it in Print Studio you can save it as an STL by going to file > export all / selected in Print Studio.  Just choose whichever printer is most similar to yours.  Since you're not going to create gcode it doesn't really matter. 

edit: just realized this question is a month old, but hopefully it'll help someone else out.  😉

[peter_campbell103]

Hi and thanks for your reply and advice.  I found another way which is just to deselect send to print utility in the 3D Print drop down.  It just brings up a save option for an stl which I then ran through my flash print utility.

Cheers

Peter   

[agenttoff]

Ah, you're right, that is much easier, thanks for sharing, it'll save some unnecessary effort.