Parts4Cad Support?

HughesTooling · ‎06-30-2017

Who does support for the parts4cad plug-in? I've found that parts with a point in the part number don't get assigned the correct part number in Fusion. So a 6.5mm ejector pin from DMS for example will be given the name _AH6, it should be _AH6.5x160. If I select a 6mm pin it imports with the correct name, _AH6x160. I've tested with parts from other suppliers and get the same problem, part numbers are truncated at full stops\decimal points.

Thanks Mark

Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

paul.clauss · ‎06-30-2017

Hi @HughesTooling

Thanks for posting! I was able to reproduce this issue and have logged it as FUS-33822. While I am not sure if this is an error on our end or from Parts4Cad, we will be looking into it. As always, we appreciate you bringing this to our attention.

Paul Clauss

Product Support Specialist