Measure dialog too sparse

[Anonymous]

When measuring, most of the time you need to know the distance in X, Y or Z, and usually not the calculated vector length and angle.

I know you can mark two faces to get the "normal vector" length, but why not just present the direct X, Y and Z values always.

/Henrik

[Anonymous]

Good point. Also, there was another topic regarding the measure dialog the other day:

http://forums.autodesk.com/t5/fusion-360-ideastation-request-a/measurement-tool-improvements/idi-p/5...

Perhaps cast your vote there too if you so the topic in general gets more attention..

Niels

[Anonymous]

An annoying thing is also when some measurement points have been selected, the boxed [1*] and [2*] markings sits on top of the drawing, and as such hides the measurement point. It should be possible for the user to drag the boxed markings out of the scene, and then the selected point could be connected wth a line to the marking box.

Also, the star function in the marking box, has no real use as it just doubles the measure dialog functions. What about giving the user an option to clear the specific marking.

/Henrik

[promm]

@Anonymous,

You can now check the XYZ delta box to see the results.

Cheers,

Mike Prom