Connecting lines from sketch

[Anonymous]

Hello,

I created some curvy lines in the sketch and extruded them.

I want to connect them on the top on the extrusions.

Is there any way to do that?

Thanks

[g-andresen]

Hi,

please show in a screencast what you want to achieve 

günther

[Anonymous]

I want to connect the walls like in the picture with the red line (not just with a line, with a full face).

[g-andresen · Accepted solution]

Hi,

1. create a sketch plane

2. project the contours of the surfaces & add needed lines

3. create surfaces from projected lines

günther

[davebYYPCU]

Need the file to be sure of this, 

go back to the sketch you had for the other walls, and add the red line, 

Edit the extrusion feature, and select the new line.

Will only work like that if you have a history timeline.

Might help....

[Anonymous]

Thank you @g-andresen 

[kackako]

Is it possible to connect all the lines so that I can draw the sketch?

[davebYYPCU]

Looks like new sketch for each line, to connect, 

all lines should be in the same sketch.

Might help….

[TheCADWhisperer]

@kackako 

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?