Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
How to Design Underground facilities such as carpark or house basement?
Ok, I just found the way to do this. Draw a Zone around the area you want to 'dig' down. Use the Terrain edit tool to pick the Zone and set the negative elevation. Then draw your building based on that lowered topo.
Ok, I just found the way to do this. Draw a Zone around the area you want to 'dig' down. Use the Terrain edit tool to pick the Zone and set the negative elevation. Then draw your building based on that lowered topo.
One issue with this technique is that the line-buildings drawn above snap their base automatically to the lowered terrain. The basic buildings don't seem to do that.
One issue with this technique is that the line-buildings drawn above snap their base automatically to the lowered terrain. The basic buildings don't seem to do that.
