Using robot

[ana_t2]

[ FlexSim 17.2.1 ]

Hello,

I have very simple model in which I would like the robot gets a box from the conveyor and put it on another conveyor. Unfortunately, the conveyor doesn't have the option "use transport" which allows me to do what I want. Does anyone have an idea what I have to do?

PS: I need to use conveyor. I cannot use Queue instead.

Thanks a lot,

[ralf_gruber · Accepted solution]

Hi @Ana Ta,

with the conveyors the transport is not initiated from the conveyor itself, but from the exit transfer, the little white square at the end of the conveyor when you connect it to the following object. Double click the exit transfer and you will see the usual transport options. Attached is a little sample model.

20170913-sampletransportfromconveyor-rg.fsm

Good luck

Ralf

[ana_t2]

@Ralf Gruber Thanks a lot. It is working now 🙂