configuration Task executer

[garyquelca910]

[ FlexSim 18.2.2 ]

Good evening I would like your help for the following problem:

In a process you need an operator and a transpallet to take a product to store, in this case the product would be a flowitem, the operator a task executer, I have doubts about how the transapallet would represent, that is, the operator goes through the transpallet and pick up the product, I would greatly appreciate your help with an example. Thank you.

[jeff_nordgren]

@Gary Q

Could you send in your model or a sample model of the problem? You mention that the transporter goes through the transpallet but without a model to look at it would be very difficult to give you an accurate answer to your question.

Thanks.

[garyquelca910]

@Jeff Nordgren

Here is the model:
the taskexecuter 1 should be the transpallet, it could be said that the flowitem needs the operator and the trasnspallets (task executer1) to send the product due to the weight of the product I hope your help thanks.operator.fsm

[joshua_s · Accepted solution]

Is this visually what you are looking for? 15441-operator.fsm

[garyquelca910]

@Joshua S

yes thanks, if I have any questions I will let you know

Thanks for the help

[garyquelca910]

@Joshua S

I have problems in performing the task, this time for a set of operators, using a dispatcher

[joshua_s]

@Gary Q

Can you send your model, the model I sent was custom tailored to your previous process, and won't work for a dispatcher. You would need build a dispatching type of system in process flow.

[garyquelca910]

@Joshua S

Here is the model, in this case are more operators, the operation should be like the previous model that sent me

I would like your help operator.fsm

[joshua_s]

@Gary Q

How would you like your process to work? Should there be as many transpallets as operators?

[garyquelca910]

@Joshua S

Exactly there should be as many transpallets as operators

a question in case of using the experienter, specifically in increase or reduction of operators and transpallets

There will not be any problem?

[joshua_s]

@Gary Q

Here's the model where you can vary the number of operators and Transpallets based of labels on Queue1. I Also added an experimenter with scenerios based on the label changes on the Queue1, so you can see what happens with an increase in Operators and Transpallets.15485-15441-operator-1.fsm

[garyquelca910]

@Joshua S

I would like your help

[joshua_s]

@Gary Q

Take a look at my previous comment which has a model in it.

[garyquelca910]

@Joshua S

Thanks for the help

[garyquelca910]

@Joshua S

sorry, how can I make it so that the conditions of the model are met, where there are separators and queues where the requirements are by type of item groups.fsm