Solved: Re: Latest Updates | New Knowledge Network Articles | FeatureCAM

matthew.d · ‎01-25-2018

Question: Where can I find a list of the latest Autodesk Knowledge Network support solutions that were created and/or updated for FeatureCAM?

(List shown in chronological order)

Subscribe to receive updates for new FeatureCAM's Knowledge Network articles.
For more updated solutions, also check out the Autodesk Blogs!

Matt DiMichele
Autodesk Product Blogs | @ADSKCommunity Twitter

Likes are greatly appreciated. Everyone enjoys a thumbs up!

Please Accept As Solution if this resolves your issue, to help others benefit and locate it.

matthew.d · ‎01-25-2018

September 2018

Difficult to see imported geometry as it is shown in white in FeatureCAM

Datum shift in NC code when posting from FeatureCAM

Do Multiple Fixture documents support multi-axis machining in FeatureCAM?

Extra Z value is added in NC program for turning operation in FeatureCAM

How do you set the start point in Featurecam Wire EDM

How to machine vertical surfaces in FeatureCAM

How to move tool change location in FeatureCAM simulation

How to offset a chamfer mill tooolpath to cut with the side of the tool in PartMaker

How to remove selected faces from a solid in FeatureCAM

How to show a region of interest in FeatureCAM

Setting scallop height in parallel finishing in FeatureCAM surface milling

Tool holders are missing in Vericut when opening a FeatureCAM template file

How to create a linear surface from multiple curves in FeatureCAM

How to edit tool change locations for a swiss document in FeatureCAM

No geometry shown after importing a dwg file into FeatureCAM

Import Vise add-in resulting in extra parallel in 3D simulation in FeatureCAM

No toolpath generated Tool diameter may be too big or unnecessary for side feature in FeatureCAM

Which product should I use for CNC programming

Error: “No public macros found” while accessing setupsheet macro in FeatureCAM

3D Simulation taking too long with multiple feature in FeatureCAM

How to copy a feature from one setup to another in FeatureCAM

5-axis toolpath in PartMaker causing crash at the machine

Centerline simulation is slow in a swiss document in FeatureCAM

Crash in FeatureCAM 2019.1 while creating a thread from a curve

Features translating differently in FeatureCAM

How to align a turning part in FeatureCAM

How to join separate solids together within FeatureCAM ?

How to mill the OD of a part with an endmill that has a Y-axis shank in PartMaker

UPM and RPM are locked when setting User Defined Feeds and Speeds in a tool

Warning: “Tool diameter is greater than the max tool diameter. Curve may not be cut cleanly.” in Fea...

FeatureCAM is not changing values in Machining Attributes when I select a different Machining Config...n

Error on 3D simulation - Cannot find appropriate tool block for the tool

How to create NC program in FeatureCAM

How to switch a document to use a different Machine configuration in FeatureCAM

PartMaker randomly crashes

Unable to edit a curve in FeatureCAM

Where are tool holders and spindles saved to in FeatureCAM?

Can I use machining strategy “Surface Milling within FeatureCAM Standard 2018 ?

FeatureCAM ignores custom stock and cuts in air in milling

How do I download PartMaker

How to convert surfaces into a solid in FeatureCAM

How to create an automatic backup of a FeatureCAM file

How to do rest roughing in FeatureCAM

How to export a part geometry as *.pdf file in FeatureCAM

How to rough a side feature by continuous spiral Z in FeatureCAM milling

Retract move after final boring pass gouges the part in FeatureCAM turning

Semi finish allowances are not reflected correctly in g code in FeatureCAM turning

Unable to slow down tool plunging with Vortex in FeatureCAM

Where to find PartMaker tutorials

Wind fan not working in FeatureCAM

August 2018

’D' value error occurred on a machine controller while running an NC program generated from FeatureC...

“Radial around index axis” grayed out when creating pattern in FeatureCAM

Cannot remove geometry lines in FeatureCAM

Error: “Simulation aborted due to unexpected error #202” in PartMaker

Feed rate becomes 0 when switched from FEED/MIN to FEED/REV in FeatureCAM

Groove depth of a cut is ignored in FeatureCAM

How to change the size of the snapping box in FeatureCAM

How to change the stepover of a Vortex toolpath in FeatureCAM

How to create a tool library in FeatureCAM

How to create a toolpath for OD wrapped pocket in FeatureCAM

How to create an eccentric turning toolpath in PartMaker

How to extend a turn feature in FeatureCAM

How to move a hole feature in FeatureCAM

Octagonal tool in simulation : FeatureCAM

PartMaker surfacing toolpath not machining a selected surface completely

Quick method to chain tiny pieces of geometry in FeatureCAM

Raster finishing stopped working in PartMaker when FeatureCAM 2019 was installed

Unable to climb cut when helical milling a hole in FeatureCAM

Unable to create a network shared tool database in FeatureCAM

Internal radius being machined too large : FeatureCAM

How to linearize arc moves for 2 axis lathe in FeatureCAM

Changing the default counterbore tool size in FeatureCAM

Error: “Problem Calculating Toolpath” in PartMaker when creating a hole group

Error: “Problem importing solid model” in PartMaker

Holders and shanks are missing from the MSAccess database in FeatureCAM

How to add extra deep passes for larger chamfer than the tool possibility

How to create curves from a text on a solid model in FeatureCAM

How to lead-in on the XY plane when swarfing in FeatureCAM

How to remove holes in a part by creating a new solid in FeatureCAM

How to use the ‘FeatureCAM to Vericut’ plugin in FeatureCAM

PartMaker crashes when material library is opened or changed

Print preview shows a grey box instead of the actual model in a shaded display in FeatureCAM

Program too large for machine memory : FeatureCAM

Project text onto a surface : FeatureCAM

Removing decimal point from Tool Diameter offset output code in FeatureCAM NC

Selecting bullnose insert tools by default for roughing with sharp corner pockets in FeatureCAM

SetupSheet addin no longer works with Excel after 2018.3.3 update: FeatureCAM

Singlepoint thread milling in PartMaker

Turn feature not fully machined when strategy is set to face in FeatureCAM

When doing a cutoff with an endmill in PartMaker the finished part does not show in simulation

Post processor does not post an eject process in PartMaker

Vortex strategy not milling selected area in PartMaker

B axis numbers off on pattern around arbitrary axis in FeatureCAM

Edge clearance is not working when chamfering in PartMaker

How to reduce the number of visible line on a round stock in FeatureCAM

How to use a PartMaker post in FeatureCAM

B axis numbers off on pattern around arbitrary axis in FeatureCAM

Getting G01s and G00s in the same lines in code Posted from FeatureCAM

Thread features that are after a Bar pull feature in FeatureCAM do not output the correct Z location...

Unable to set a correct radial pattern in FeatureCAM milling when the center of rotation of the patt...

How to create a surface projection curve in FeatureCAM

Warning: “Tool too large” in FeatureCAM

“Drill depth adjust” attribute not working for bore operations in FeatureCAM

After importing SolidWorks model FeatureCAM’s graphics is slow or freezes

How to create a custom form tool in Featurecam

How to create a swarfing toolpath in partmaker

How to move a vise in FeatureCAM after importing it

How to wrap a simple groove feature in FeatureCAM

Clicking the F2 hotkey does not work to rename Setups in FeatureCAM

FeatureCAM Training Tutorials

How to align a solid model in FeatureCAM

How to create a spiral face toolpath in FeatureCAM milling

How to edit the dimensions in a FeatureCAM tombstone document that has been defined incorrectly

How to import multiple vises in FeatureCAM

How to machine multiple parts from a single piece of stock in FeatureCAM

How to send NC code to a server from PartMaker

How to switch from a local Database to a Network mdb Database at FeatureCam

How to use the LoadConfigForMaterial add-in for FeatureCAM

ID Groove retract move gouges part in FeatureCAM

Machining a slot on the front of a part using X and Z in PartMaker

Spot drill not showing up in Process Table in PartMaker

Where to find customer pin for downloading PartMaker posts

July 2018

Can PartMaker handle Mazak Integrex tool numbering?

Operations machine features from setup 2 before setup 1

Ribbon keeps disappearing in FeatureCAM

Is there a way to control what AFR finds for turning features in FeatureCAM?

How to Create a new setup in FeatureCAM Version 2019

Changes made to PartMaker post not showing up in code

Error: “Network License Not Available” when importing Solidworks model into PartMaker

FeatureCAM 2017 posting out two different starting positions

How to add custom vises and chucks using the Import Vise add-in in FeatureCAM

How to create a spherical surface using FeatureCAM

How to export Simulation results as an STL model in FeatureCAM

Removing the “Tool List” section from a setup sheet in FeatureCAM

Wrong sub-spindle position in PartMaker simulation.

How to turn off the snapping grid in Featurecam

ActiveX Runtime Error when running macro in FeatureCAM

PartMaker engraving fonts look incorrect

Process table in PartMaker does not retain feeds and speeds when re-opening job

Roughing tool plunging into stock on Side feature in FeatureCAM

Ellipse tool creates distorted shapes in PartMaker

Error: “You have loaded a demo post and therefore you will not be able to access these files.” when ...

Form tool does not look like the curve used to define it in FeatureCAM

Getting an arc move in the wrong plane in FeatureCAM

How to change the standard thread heights when thread milling in FeatureCAM

How to change the starting location of a Rotary Finishing toolpath in PartMaker

How to create a helical toolpath that gets larger as the depth increases in FeatureCAM

How to create a negative draft angle with a variable radius in FeatureCAM

How to generate NC code based on the machine’s max spindle speed in FeatureCAM

How to limit a bore feature toolpath when the stock is a casting.

How to simulate a part using machine tool in FeatureCAM

Single feature going to two different depths when programmed using a pattern in FeatureCAM

Solid model looks choppy when zoomed in in FeatureCAM

Stick tools are pointing the the wrong way in Partmaker Simulation

The add-in FeatureCAMToCAMplete is not sending out the holder solids or tools defined with curves co...

Tools that were set in FeatureCAM files are no longer set after reopening

Unable to drag text in PowerShape

How to convert plain holes into tapped holes in a batch in FeatureCAM

How to adjust cycle time for rough processes to cycle time for finishing processes in PartMaker

PartMaker does not generate NC code even though the post processor is loaded

Rotating tool path on 4th axis on vertical mill in FeatureCAM

Transform Feature rotates them in undesired way

Editing error after running AFR in FeatureCAM

How to load a Post Processor into FeatureCAM

When trying to extrude cut a solid in FeatureCAM it adds instead of cutting

How can I rough in Z when turning in FeatureCAM

How to bulk edit a dimension for an entire list of features in FeatureCAM

How to machine multiple setups without stops in between in FeatureCAM

Unable to find Transform function in FeatureCAM 2018

Error: “CNC file C:\file location.cnc does not exist" when trying to post in FeatureCAM

How to create a knurl in FeatureCAM

How to output linear moves instead of helical G03/02 moves in FeatureCAM

Rotate C for each instance is missing for patterned side features in FeatureCAM Turn/Mill

June 2018

FeatureCAM crashes when using files from SolidWorks PDM Vault

How do I add a Q value for peck tapping in PartMaker

Thread mill not coming back to center in PartMaker

5-axis drilling in PartMaker is only posting out Z coordinates

Define custom insert shape using curve for threading tool in FeatureCAM

FeatureCAM : Unable to connect to an existing network tool database (Access type)

FeatureCAM Postprocessor for SNK CMV-100T with pallet control

FeatureCam: Simulation Looping

Holes look octagonal during 3D simulation in FeatureCAM

How to set solids as clamps to show up in 3D simulation: FeatureCAM

Mode M1S0 for stationary stock not implemented error in PartMaker

Solidworks 2018 assembly won’t import into FeatureCAM 2019 properly

Vise doesn’t appear in 3D/machine simulation: FeatureCAM

Custom engraving fonts are not posting out arcs from PartMaker

How to get trochoidal moves in FeatureCAM

Can’t increase thread depth for tapping cycle in FeatureCAM

Can’t make changes to configuration file in FeatureCAM

Changed width of cut in PartMaker but it is still only taking one pass

Error importing DXF/DWG files using Autodesk Manufacturing Data Exchange: FeatureCAM

How can I use different font types to engrave in PartMaker

How to create a 5-axis plane in PartMaker if you do not have a model

How to load a tool crib from a previous version of FeatureCAM

Unable to perform a 3D milling simulation using FeatureCAM

May 2018

3D simulation doesn’t match centerline simulation after patterned operation: FeatureCAM

Can not see Automatic Feature Recognition (AFR): FeatureCAM

Cannot create custom shape from open profile error in PartMaker

FeatureCAM : Can’t find ramp in arc / ramp out arc warning

FeatureCAM : Show shaded tool in centreline mode

Pocket leaving islands after finish pass: FeatureCAM

Unwanted overlapping is created when doing polar machining in PartMaker

How do I copy a milled feature around a part in PartMaker?

Ribbon not showing properly: FeatureCAM

April 2018

FeatureCAM : Tool Numbers incorrect

FeatureCAM: Custom holder from imported solid

How to set up a custom shaped stock using solid: FeatureCAM

How to to modify stock to reflect features already performed on other machines: FeatureCAM

FeatureCAM : Machining a large chamfer with a smaller tool

FeatureCAM : Finish bottom results in no toolpath

FeatureCAM : Z level finishing toolpath lifting between cuts

FeatureCAM : Pre 2017 version starting in evaluation mode

Manufacturing Data Exchange Utility update 2018.1.2 failed to install via ADA and manually

March 2018

FeatureCAM : How to create a Stock that has more than one piece of material

Not able to type in ZX coordinates in PartMaker CAD or CAM mode

Center of tool nose radius is going through the tool path line rather than below it on an ID boring ...

Clearance moves on ID feature on sub spindles not working: FeatureCAM

Countersink tool going too deep after changing hole type: FeatureCAM

Featurecam is not opening and a small box is in the middle of the screen

How to leave material when roughing using surfacing in PartMaker

FeatureCAM : Form tool cutting too deep

FeatureCAM : Screen flicker when switching view / tabs

How to disable canned cycles in PartMaker

Main spindle turn is waiting for eject to complete before starting next part in PartMaker

FeatureCAM 2018 interface is slow

FeatureCAM 2018 : Dimension text invisible or too small

FeatureCAM 2018 : How to compare 3D simulation to Model

How to set a turning tool to a fixed b-angle in FeatureCAM

PartMaker toolpath verification runs twice in the 2-D window

Error “Clm: Authorization fail (kStatusFail)” with MotionBuilder 2018 on Linux

How to force a Z level rough to cut from the bottom to the top: FeatureCAM

February 2018

Help!!! Balloon not working

Resetting EZFM_ui.ini and EZFM_ui.xml files in FeatureCAM

Sub spindle dropping part in 3D/ machine simulation before back side machining can be done.

Exchange Has Failed when opening a DXF

FeatureCAM : Is there an Autosave function?

Featurecam to ncsimul addin does nothing when running the addin

ID threading cycle results in oversized hole - FeatureCAM

How to bring back DXF or DWG import dialog in FeatureCAM

How to create a custom Lathe tool holder from a curve: FeatureCAM

When opening FeatureCAM the whole window is not showing

Cannot rotate model in FeatureCAM

Error : Cannot create log file C:\Users{username}\AppData\Local\Temp\iges_log.txt for export. Please...

FeatureCAM 2018 : Add-in has no Icon

FeatureCAM :How do I edit my post processor list

How wrap a chamfer around the c-axis in FeatureCAM

FeatureCAM : Updating a multi fixture document

How do I create segmented threading in PartMaker?

Can I take an Excel document and use it as a setup sheet template in PartMaker?

When surface milling there is a dimple/gouge at the edge of the surface in the part: FeatureCAM

January 2018

Process are not always grouped together in PartMaker process table

Rotary toolpath is gouging with lollipop tool in Partmaker

How do I lock tool parameters in PartMaker

How to apply a Back chamfer to a curve based feature using a dovetail tool in FeatureCAM

How to create a custom holder from a curve: FeatureCAM

How to setup and use a mini turret for Turn/Mill: FeatureCAM

Camplete addin does not load: FaatureCAM

Can’t change the Stepover on an operation when a draft angle or bottom radius is set: FeatureCAM

Can’t select hole in PartMaker Mill

FeatureCAM : How do I pre-set my tool numbers

How to get vortex to approach from outside: FeatureCAM

FeatureCAM : How to untrim hole in surface

FeatureCAM : Unable to import Solidworks 2018 file

Where to find post processors shipped with FeatureCAM

FeatureCAM Ultimate 2018 activation issue

How to extend surface milling past the edge of a part in FeatureCAM

How to order processes in PartMaker Mill

Surfacing toolpath is gouging in PartMaker when using a lollipop tool.

Symbol attribute order incorrect when you show /edit miscellaneous

Undefined travel limits error in PartMaker full machine simulation

Matt DiMichele
Autodesk Product Blogs | @ADSKCommunity Twitter

Likes are greatly appreciated. Everyone enjoys a thumbs up!

Please Accept As Solution if this resolves your issue, to help others benefit and locate it.