Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Sorry for the beginner question, but is there a way to generate a .brd from a .sch?
I know that board layout is different from schematics, but I got some schematics generated automatically, and I don't know if to design my board I will have to redo everything from scratch (including footprints...).
Got my schematics (attached) from thingtype.com - huge time saver, but in the free plan they only give away the schematics, unless you order prototypes...
Sorry for the beginner question, but is there a way to generate a .brd from a .sch?
I know that board layout is different from schematics, but I got some schematics generated automatically, and I don't know if to design my board I will have to redo everything from scratch (including footprints...).
Got my schematics (attached) from thingtype.com - huge time saver, but in the free plan they only give away the schematics, unless you order prototypes...
there is a button in the toolbar with BRD labeled on it, click it and you will get a new board design. You will need to move the componennts into place and then route the signals.
there is a button in the toolbar with BRD labeled on it, click it and you will get a new board design. You will need to move the componennts into place and then route the signals.
Still have to place and route (or most likely find somebody to do it), but at least all the schematics/consistency check/footprint/pricing is already done...
Still have to place and route (or most likely find somebody to do it), but at least all the schematics/consistency check/footprint/pricing is already done...
